Activity
From 09/13/2010 to 11/11/2010
11/11/2010
- 10:54 pm Revision 628ec66a: U2P: saner image burner output messages
- 10:41 pm Revision 30996463: usrp_e : Add missing header file.
- 10:06 pm Revision 5a3b5a06: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- 09:32 pm Revision 6ead5877: these got dropped during the rebase
- 08:23 pm Revision 5da1e3e2: Merge branch 'ranges'
- 08:23 pm Revision 314efb09: usrp2: switch the timeout to units of seconds
- 08:19 pm Revision e0d84e8c: uhd: pulled in some worthwhile changes from flow control branch
- 08:15 pm Revision 08ace12b: Removed 'ifdef for second DCM that was a deign idea for external SRAM on u2plu...
- -90 degree clcok from first DCM as final solution
- 08:15 pm Revision 51d68f09: 1) Created new FIFO IP in Coregen. 512x36 dual clcok FIFO with programable ful...
- 2) Put larger FIFO on output of u2plus extramfifo that is compatable with u2_rev3 EMI fixes.
- 08:13 pm Revision 4e5f4e13: 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZ
- which allows the SRAM to be placed in a sleep mode. This pin was
erroniously pulled high at the top level rendering t... - 08:10 pm Revision 60a22a52: Enabled phase offset adjustment on DCM_INST1 which drives the external Fast SR...
- Set phase shift to -12 after experimentation using logic analyzer to see results.
This value gives near optimum 1.5nS... - 08:10 pm Revision aa9643f6: Placed 2nd DCM into `ifdef DCM_FOR_RAMCLK which is dissabled by default
- Derived RAMCLK from 270degree offset of principle core DCM giving
theoretical 2.5nS timing advance on RAM_CLK relativ... - 08:10 pm Revision ddb38014: Defaulted all SRAM pins to LVCMOS25 8mA FAST
- 08:10 pm Revision 8507271d: revert unneeded changes and incorrect comments
- 08:10 pm Revision 2261035e: reconnect GPIOs, remove debug pins, meets timing now
- 08:10 pm Revision 84b42223: Modified phase shift of DCM1 to -64 which is intended to give more timing marg...
- Tested to be at least as stable as a phase shift of 12 and beter looking timing on the logic analyzer.
Signals driven... - 08:10 pm Revision 7e75951d: Added external RAM FIFO to u2plus.
- Added code branch to ext_fifo.v using generate that instantiates
different input and out fifo's and touched nobl_fifo... - 08:10 pm Revision 0a28cb5e: Added to DCM's and some BUFG's to align the internal 125MHz clock edge with it...
- Since we don't have a board level trace to use to estimate clock propigation delay we just loop through the I/O on th...
- 08:08 pm Revision 0a272630: Enhanced test bench to be more like real world application
- 08:08 pm Revision c8156913: hangedddddddextrnal fifo size to use full NoBL SRAM
- 08:06 pm Revision a782395e: capacity logic fix
- 08:06 pm Revision b4d3dba5: Corrected extfifo code so that all registers that are on SRAM signals are pack...
- Explcit drives and skews added to GPIO pins
Corrected minor error in FIFO logic that showed data avail internally in... - 08:06 pm Revision 9d4fa0e2: Added capacity to the module pinout
- 08:06 pm Revision 9bfab308: Added a bunch of debug signals.
- 08:06 pm Revision d4b6fa72: Regenerated FIFO with lower trigger level for almost full flag to reflect logi...
- Improved ext_fifo_tb further, try to simulate more combinations of decomation rates and packet arrival patterns.
Str... - 08:00 pm Revision e5cae33e: Regenerated FIFO's for extfifo.
- There are problems with certain configurations it seems.
It is important that the fifo_xlnx_512x36_2clk_18to36 is
gen... - 07:56 pm Revision 65b67186: Edited FIFO instance to delete port that was not regenerated after reconfigura...
- 07:56 pm Revision 7977684b: Adding in files that probably didn;t exist in the ISE10.1 version of coregen
- 07:56 pm Revision ff21cc75: Found bug due to not accounting for the correct number of possible in flight R...
- Regenerated fifo_xlnx_512x36_2clk_18to36 to include prog_full output triggered at 1017 so that there are 6 empty spac...
- 07:56 pm Revision 04e5b712: Bringing all coregen files checked in into sync
- 07:47 pm Revision b48b0f17: External FIFO tested in simulation and on USRP2 from decimation 64->8 with cur...
- Apparently operation is "flawless" but more regression and corner case regression could and should be done.
Tristate ... - 07:47 pm Revision 408fac95: checkin of generated coregen files
- 07:36 pm Revision f9db9f4e: moved forward from the old branch
- 07:36 pm Revision d0742cf2: get it to build
- 07:36 pm Revision fb73ea17: Checkpoint checkin.
- Loopback is running via the external ZBT SRAM...HOWEVER, its not running well, its stable but the data is corrupted s...
- 07:27 pm Revision be3f1411: usrp-e100: add serial and name checks to the usrp-e100 discovery routine
- 07:07 pm Revision 926fd69d: usrp_e100: added byteswapping calls to vendor and device (its NBO)
- 06:41 pm Revision 0d0b4724: Merge branch 'usrp_e100_i2c' of ettus.sourcerepo.com:ettus/uhdpriv into usrp_e...
- 06:41 pm Revision 791401f9: usrp-e100: split vendor/device field for eeprom, rename fab rev to model, fixe...
- 05:20 pm Revision f2d5f0b1: usrp_eXXX: Only include i2c-dev.h due to struct definition conflicts.
- 06:47 am Revision 06e2e1e0: uhd: made unit test for meta range and fixed bug
- 03:41 am Revision 24517fa9: dbsrx2: updated code for ranges use
- 03:29 am Revision 775383e6: uhd: added meta-range clip and implemented in dboards, fixed step calculation
- 03:29 am Revision 08dfff37: uhd: created a meta range that is a range of ranges for gains and freqs
- created a templated range that that holds a start, stop, and step
created a meta-range template that is a vector of ... - 03:19 am Revision b7b3e828: usrpbbbbbbbbbbbeeeeeeeeeeee fix typo
- 01:40 am Revision 6eef3315: U2P: i can't spell
- 01:26 am Revision ff836c0b: U2P: Added U2P stuff to images/ Makefile
- 01:24 am Revision f64f1b5c: reverting part of the reversion of the spi settings.
- 12:48 am Revision a724f4b7: usrp-e100: implemented wrapper for i2c device node + ioctls, implemented e100 ...
- 12:28 am Revision 7e20fa3d: u2p needs the bigger regs for some reason
- 12:23 am Revision e0b3b4e3: U2P: Ripped out the mboard_rev_t structure in favor of an enum in usrp2_regs.h...
- Also change ethernet.c to move generic code to eth_lib.
11/10/2010
- 08:15 pm Revision fb0cdbc5: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p-next
- Conflicts:
firmware/microblaze/lib/u2_init.c
host/lib/usrp/usrp2/clock_ctrl.cpp
host/lib/usrp/usrp2/fw_common.h
h... - 08:02 pm Revision 8fe1e7b2: 2+: moved mboard_rev to usrp2/ in preparation for merging upstream
- 07:50 pm Revision a0dfafff: need to enable both 16 and 32 bit spi interfaces -- 16 used in u1e, 32 in u2 a...
- 07:32 pm Revision ba36bdd2: occ needs to be 2 bits wide on a 36 bit fifo interface.
- 07:29 pm Revision c7be879f: Merge branch 'u1e' into merge_u1e
- * u1e: (130 commits)
invert led signals because they are active low
duh
allow for CS to rise before, at the sam... - 07:27 pm Revision 123de6da: Merge branch 'master' into usrp_e100_i2c
- Conflicts:
host/utils/CMakeLists.txt - 07:14 pm Revision 8c434f7d: uhd: renamed enums to reflect new convention
- 06:45 pm Revision 0d83209d: usrp1: usrp1 util is conditionally enabled
- 06:45 pm Revision 793519d6: Merge branch 'master' into usrp_e100
- Conflicts:
host/utils/CMakeLists.txt - 06:30 pm Revision 57a2fa2e: usrp-e100: added empty eeprom for eeprom get property
- 06:27 pm Revision 8d245c6e: uhd: reorganized utils cmakefile to use list of sources
- 06:09 pm Revision 3e695d1c: fixed string constants find and replace typo
- 04:10 am Revision 3aba990a: usrp-e100: add header path for the utils directory as well
- 03:23 am Revision b43a1a9d: usrp-e100: moved kernel header to lib dir, remove the header check, default en...
- 03:08 am Revision 98a41307: remove old commented out code
- 03:02 am Revision 5f2c7138: usrp-e100: renamed files and classes in usrp-e100 to e100 name
- 02:56 am Revision 76d26972: fix timing problem on DAC output bus
- 02:48 am Revision d33a6cab: usrp_e: renamed directory to usrp_e100 to reflect product name
- 02:44 am Revision 61d9cda7: usrp-e: check the return code on system call, also removes warnings
- 02:38 am Revision 3bca8c49: Merge branch 'master' into usrp_e_next
- 02:38 am Revision 07351808: usrp_e: use the transport to calculate the max spp (with a fix to init the xpo...
- 02:26 am Revision 9cd8652b: invert led signals because they are active low
- 02:13 am Revision 7824f130: usrp_e : Unload the module before loading the FPGA. Reload after the fpga is l...
11/09/2010
- 11:07 pm Revision c0dfc2cf: added warning about rfx classic boards and dboard notes
- 01:22 am Revision 81c9f773: usrp2: implemented clear state for RX and TX control, and zero sample command ...
11/06/2010
- 04:22 am Revision 374f6ff0: Merge branch 'master' into flow_ctrl
- Conflicts:
host/lib/usrp/usrp2/mboard_impl.cpp
host/lib/usrp/usrp2/usrp2_impl.hpp - 04:10 am Revision c2cc364f: usrp2: led F documentation fix
- 03:43 am Revision a8a57ef9: dbsrx2: removed windows warnings, made bandwidth param a double
- 03:32 am Revision 0c5dbee7: Merge branch 'dbsrx2'
- 03:32 am Revision e5fcd071: usrp2: added notes about 3rd party sd cards to docs
- 03:11 am Revision 316423a8: Working DBSRX2 daughterboard code
- 03:11 am Revision f854119e: Added mangling for DBSRX2 i2c addresses on USRP
- 03:11 am Revision 634a331f: Adjusting rx_get and rx_set for newer keys
- 03:11 am Revision 79c8f80b: Working DBSRX2 daughterboard code
- 02:55 am Revision 13d735c6: Merge branch 'mb_eeprom'
- 02:54 am Revision f740a51c: uhd: created docs for the device naming, command usage in usrp2 docs, removed ...
- 12:56 am Revision 1a86e65a: uhd: for eeprom writeback, write and set only those values changed
- 12:39 am Revision 94a492dc: uhd: rename identifier for usrp1 eeprom, and fix offsets, add serial support t...
11/05/2010
- 11:09 pm Revision 9d50dea1: uhd: dont check for python interp if PYTHON_EXECUTABLE specified
- 08:53 pm Revision 3ac34571: Merge branch 'good_stuff' into mb_eeprom
- Conflicts:
firmware/fx2/include - 07:32 pm Revision c473cc56: usrp1: pulled in cmake build system for usrp1 firmware
- 08:01 am Revision 144ebf29: usrp: implement name checking on dicovery (all platforms), separate usb serial...
- 06:44 am Revision 0066ef29: usrp: replaced device specific burner apps with one generic one for mboard eep...
- 04:25 am Revision 9dff7952: usrp: print eeprom key/value pairs in the probe app, fixed mac addr size
- 03:38 am Revision fcf9f6ba: usrp2: move mboard eeprom instance into iface to the clock control can access it
- 02:40 am Revision 7c36bc7b: Merge branch 'good_stuff' into mb_eeprom
- 02:39 am Revision c8cb4bca: usrp2: implemented mboard eeprom into usrp2 mboard
- 02:37 am Revision 7a7e704f: Merge branch 'ovfl' into good_stuff
- 02:37 am Revision d370b4bb: Merge branch 'garp' into good_stuff
- 02:32 am Revision 4d6caa8a: images: remove exe bit left by some build processes
11/04/2010
- 11:43 pm Revision 20c9b194: usrp: created mboard eeprom map class, implemented for usrp2
- 09:44 pm Revision bab641f4: usrp_e : Fix register definitions for COMPAT and others.
- 09:43 pm Revision a8fcdba5: usrp_e: Comment out fpga loading until we unload module during load.
- 09:26 pm Revision 57fcaa24: duh
- 12:02 pm Revision 40080e47: Merge remote branch 'origin/usrp_e_next' into usrp_e_next
11/02/2010
10/31/2010
10/29/2010
- 01:34 am Revision 92b5034c: Merge branch 'master' into flow_ctrl
- 01:23 am Revision a8d2c294: Merge branch 'next'
- 01:14 am Revision 6a3e499f: Fix Bandwidth for IQ subdevs on Basic/LF
- Additional typo cleanup and fix WBX bandwidth
- 12:24 am Revision 5f0c948e: usrp2: documented LED E
10/28/2010
- 05:40 pm Revision 68977883: uhd: change python module check descriptions to use words
- 05:26 pm Revision 904332c7: uhd: added to python module check macro, move check to lib dir
- 02:36 am Revision 16351339: Merge branch 'next' into usrp_e_next
- Conflicts:
host/examples/CMakeLists.txt - 02:30 am Revision d7c7351b: uhd: removed dilv in rx files examples
- 02:18 am Revision dc9f22c9: uhd: added rx samples to udp example, cleaned up other examples, added gain op...
- 01:55 am Revision f820cce9: uhd: added rx to file example, simplified cmake file for examples
10/27/2010
- 11:37 pm Revision f9edd386: Merge branch 'next' into flow_ctrl
- Conflicts:
host/include/uhd/types/metadata.hpp - 10:57 pm Revision 0208b28e: usrp-e: use clock control to get clock rate, removed temporary constant
- 08:10 pm Revision fa7704be: usrp-e: implemented fpga loading and compat checking
- 06:42 pm Revision 9585a0b6: usrp_e: added support for building fpga image into images Makefile
- 06:36 pm Revision cfde84d8: Merge branch 'ue1_rev2' into usrp_e_next
- 06:34 pm Revision 1289d051: Merge branch 'usrp_e' into usrp_e_next
- 06:15 pm Revision 630c007b: usrp: added to subdev spec comments/docs
- 05:45 pm Revision 211e1906: usrp: added a time sync check for multi usrp
- 03:31 pm Revision fa689c72: usrp_e: fix to get compiling with next branch
- 03:07 pm Revision 4fb93733: Merge branch 'next' into usrp_e
- 10:27 am Revision fbdb0022: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp_e
- 01:11 am Revision a7840ebb: uhd: moved templated dict implementation into ipp file
10/26/2010
- 09:14 pm Revision cea3d050: uhd: replaced print warning with a post warning call and registry
- renamed print warning calls in the implementation
fixed issue with dict::pop so it now works even if the value is no... - 04:47 pm Revision ef8ed898: usrp: fixed validate subdev spec typo for empty string cases
- 02:22 am Revision 0168bff8: usrp: rework lo offset logic to use bandwidth, add test case
- 01:09 am Revision 01f670e8: uhd: doxygen comments, moved enum comments, added to metadata for all entities
- 12:04 am Revision 2d21958e: uhd: tune helper + request, forgot to use and set target freq
10/25/2010
- 11:47 pm Revision bb82453a: Added bandwidth property to all daughterboards
- Updated existing bandwidth property to reflect double-sided
bandwidth rather than lowpass bandwidth - 11:47 pm Revision c398e8f4: Updated bandwidths in daughterboard docs
- 10:22 pm Revision f7966440: fix copy/paste typo piroundable
- 08:41 pm Revision 359c4e16: uhd: created tune request struct and implemented more fine grained tuning calls
- 05:23 pm Revision 3c6ede3c: created ascii art dft plotter in uhd
10/24/2010
10/23/2010
- 02:11 am Revision 2d71c7a6: BasicRX: GPIOs now output 0 to decrease noise pickup.
- 12:47 am Revision 16791bed: Merge branch 'master' into flow_ctrl
10/22/2010
- 11:59 pm Revision 3974e544: dbsrx: reject asymmetric clocks (odd divisors)
- 11:50 pm Revision 96007808: images: remove exe bit left by some build processes
- 11:13 pm Revision bd06eede: Merge branch 'flow_control_fpga' into flow_ctrl
- 06:24 pm Revision 2ce71ded: Merge branch 'garp' into flow_ctrl
- 06:05 pm Revision 8a695c06: usrp2: fw sends gratuitous arp on link-up
- 04:10 am Revision f14e7eb8: the width of the address bus is called DEPTH, not WIDTH...
- 02:26 am Revision db0e3e57: usrp_e: Add driver compatibility ioctl to header file.
10/21/2010
- 10:32 pm Revision 2628d78e: Merge branch 'usrp2_overflow' into flow_ctrl
- Conflicts:
host/lib/usrp/usrp2/usrp2_impl.hpp - 10:29 pm Revision 1e57eec9: Merge branch 'master' into flow_ctrl
- 10:14 pm Revision 9a687bdb: address gray coding
- 08:10 pm Revision cd0f9cf5: slow slew rate and lower drive to 8ma on RAM_XX signals to reduce emi
- 08:08 pm Revision c32f4fbc: should combine the randomizer with flow_control
- 07:27 pm Revision bd59192b: usrp2: handle real overflow packets in host, reload continuous stream cmd, rem...
- 06:18 pm Revision 53412938: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- Conflicts:
host/lib/usrp/CMakeLists.txt - 06:17 pm Revision c31c2d7e: Merge branch 'usrp_e' of ettus.sourcerepo.com:ettus/uhdpriv into usrp_e
- 06:16 pm Revision 3dc06cdd: usrp-e: Add example that reads data from uhd and sends it over a udp socket.
- 06:11 pm Revision 090b0dd0: Merge branch 'usrp_e_mmap_b2' of ettus.sourcerepo.com:ettus/uhdpriv into usrp_e
- 05:57 pm Revision c347ad97: usrp_e: Do not install main_test anymore.
- 04:43 pm Revision e2f76bdd: usrp: remove irrelevant copied comment from single usrp
- 01:40 am Revision c2ec8c14: usrp: use a dash as the gain name prefix separator, removed RX/TX auto suffix ...
- 01:31 am Revision 2f6ab109: Moved mboard rev detection to iface.cpp.
- This fixes the incorrect FPGA compat number readback bug. We were trying to read before the register set had been loa...
- 01:16 am Revision 318d62a1: usrp: convenience wrappers for dealing with overall gains
- 12:41 am Revision d96b2e75: usrp: use the dboard id to prefix the subdev gain group names
- 12:00 am Revision 635440c5: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp_e_mmap_b2
10/20/2010
- 11:20 pm Revision 8e341caa: usrp: added gain element access by gain name to multi and single wrappers
- 10:32 pm Revision 26aef3ba: uhd: added name parameter to gain group, get range, set/get value by name
- 07:11 pm Revision e0c48ba5: usrp: added docstrings to single and multi usrp for undocumented methods
- 05:06 am Revision 9efacf19: usrp: updated docs to reflect switch to multi-usrp interface
- 12:13 am Revision b405abf8: uhd: remove some warnings in MSVC and with typo in xcvr2450
10/19/2010
- 10:42 pm Revision 799d5059: usrp: change the bandwidth param to a double (its a frequency), add set and ge...
- 10:17 pm Revision 1137ab33: Merge branch 'multi_usrp'
- 08:04 pm Revision 083413de: multi-usrp: fixed num channel calculation, moved logic to cpm functions
- 05:37 pm Revision 561bb73e: uhd: split unit tests into individual tests by file + they get installed
- 08:21 am Revision cd05791a: uhd: made ticks signed in time spec, fixed full secs implementation, added uni...
- 01:24 am Revision 982ac435: multi-usrp: corrected calculations for channel and mboard indexes
- 12:39 am Revision 84751264: usrp: deleted deprecated simple and mimo wrappers, moved implementations into ...
- 12:04 am Revision 5bf9e60b: Merge branch 'master' into flow_ctrl
- Conflicts:
host/lib/usrp/usrp2/io_impl.cpp
10/18/2010
10/17/2010
- 01:10 am Revision c861f98c: usrp: created multi-usrp (multi chan, multi board), and deprecated mimo-usrp
10/16/2010
- 08:18 am Revision 816a07be: usrp2: make the booty smaller than the number of recv frames
- This may fix some of our woes when the host cannot keep up.
That is, with a smaller booty, the managed buffers will g... - 12:05 am Revision a2abd6bc: usrp2: dont need to start streaming for this hack
10/15/2010
- 09:37 pm Revision 972fae17: usrp2: temp fix to send dummy packets and flush so FPGA vita machine are in kn...
- 06:22 pm Revision 52229e99: Merge branch 'flow_ctrl_with_fpga'
- 01:42 am Revision 6b203950: usrp_e: Disable debug.
- 01:41 am Revision 9348c276: usrp_e: back out dynamic send/recv samples calculation.
10/14/2010
- 11:55 pm Revision 26b7de0a: Merge branch 'flow_control' into flow_ctrl
- 11:51 pm Revision 71e17633: uhd: removed 1 sample buffers in test async messages
- made a hack in the vrt handler to bump 0 sample requests up to 1 sample (until the hardware supports it)
- 06:51 pm Revision 4582a2de: usrp2: move udp port initialization into mboard impl so its done before async ...
- 05:46 pm Revision b09c1592: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- 05:06 pm Revision 39ca8e25: uhd: fix docs on boost version, also add additional version string for 1.44
- 04:52 pm Revision 0582d9f5: USRP-E: brought loopback test updates in from usrp_e branch.
- 01:38 am Revision 376e22ca: usrp2: handle destination port unreachable icmp in fw (kills streaming and upd...
10/13/2010
- 11:00 pm Revision c830a0d2: USRP-E: updated the loopback tester for length checking.
- Checks lengths by pushing them into a circular buffer and popping them
out. Protected by mutex so it doesn't go chewi... - 10:01 pm Revision c25fd486: udp: fix to use concurrency hint, default hint is zero when no async enabled
- 09:28 pm Revision c6042a0b: usrp2: added docs on flow control ricer args and using usrp2 with a switch
- implemented flow control param hints in the mboard impl
- 06:59 pm Revision 4dfb7b8c: usrp: test async messages app randomly runs tests
- 06:59 pm Revision 35eda148: usrp2: increment tx sequence after commit
- 06:21 am Revision ee03f1d4: now handles frames larger than the vita packet (i.e. with padding)
- 06:05 am Revision ecea1b5b: don't clear out following packets on an eob ack
- 06:02 am Revision c82dffc8: don't flag an error on eob ack
10/12/2010
- 11:31 pm Revision 18c16ad9: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- 11:26 pm Revision 5b4cbfe4: USRP2P: mboard rev works through props interface.
- Added usrp2_burn_mb_rev.cpp to utils. It is not installed to the utils install dir.
Not all happy with the mboard_re... - 10:24 pm Revision 2c08c9a7: usrp2: register overflow, underflow, and pps level for pic
- also fix minor build issue w/ LDADD
- 09:46 pm Revision 5982ec4e: USRP2P: This is surprisingly involved. Adding a consistent interface to deal w...
- 09:07 pm Revision af1e0c12: Added documentation of daughterboard filter bandwidths
- 08:16 pm Revision b77f9abf: proper triggering for interrupts generated on the dsp_clk
- 07:57 pm Revision 8c0ca70d: Enhance XCVR2450 to clip for high/low band tuning and add bandwidth property
- 05:55 pm Revision f9755b0a: uhd: test eob ack message, usrp2: remove rx drain on init with the promise of ...
- 02:54 am Revision 80469eed: Merge branch 'set_bandwidth'
- 02:54 am Revision 02b25d34: Merge branch 'dbsrx_clock_div'
- 01:38 am Revision b49e2955: usrp2: enable the cycles per ack, and drain recv without the timeout (fixes pr...
- 01:37 am Revision 3b36c206: UHD: reordered MIMO set_rx_bandwidth arg order
- 01:23 am Revision f28c07db: UHD: Brought out set_rx_bandwidth for dboards with programmable rx filters.
- 01:21 am Revision d54fd2ab: usrp2: use select rather than manually polling the simple udp socket
- 01:09 am Revision 1314feb4: usrp2: use 32-bit flow control sequence numbers
10/11/2010
- 11:41 pm Revision 0edf80fc: cleanup for 32 bit seqnum
- 11:40 pm Revision 41489884: increase compatibility number for flow control
- 11:39 pm Revision e650ed08: switch to 32 bit sequence numbers. Will wrap in ~15 hours at max rate
- 11:31 pm Revision 453b450a: usrp2: implemented flow control monitor
- set registers in mboard impl to enable asyn fc packets
modified microblaze code to handle dummy data packet offset - 11:25 pm Revision 5898d378: DBSRX: Fixed some ASSERT statements.
- 10:53 pm Revision e45ee09d: send message on eob to ack the end of transmission
- 08:57 pm Revision b3383985: typo which isn't caught by xilinx
- 05:12 pm Revision 369c0e1d: usrp2: implement fc seq number on tx header packing
- 05:12 pm Revision 37f1f145: usrp2: add fc control registers, use small timeout for control packets again
- 06:38 am Revision a3cf4ea0: separated flow control and error reporting on tx path. should work with and w...
10/09/2010
- 01:08 am Revision 445a5ca2: uhd: fix async msg test to reflect new timeout api
- 01:01 am Revision e16fbb40: go to the correct state
- 12:54 am Revision 8aac27fa: TVRX documentation and a bugfix in the cal table. Named the antenna "RX".
- 12:40 am Revision 86d6bceb: Fixed Assertions to better document tuning failures
10/08/2010
- 11:58 pm Revision 3df994e1: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- Conflicts:
host/lib/usrp/usrp2/io_impl.cpp
host/lib/usrp/usrp2/mboard_impl.cpp - 11:33 pm Revision 58e1ca09: usrp: comments for set subdev spec in single usrp
- 11:04 pm Revision 787d8951: uhd: better warning message for failing to set rt priority
- 11:01 pm Revision b32c3729: add a fifo to the end of the mux to help in timing.
- 10:52 pm Revision 1190bc5c: usrp: added calls to get subdev and mboard canonical names
- 10:17 pm Revision 8d20d691: add trigger to makefile
- 09:33 pm Revision d8d5158e: assign setting reg addresses
- 09:07 pm Revision ecadee9c: declarations
- 09:01 pm Revision 37f928fa: checkpoint in flow control packet generation
- 09:00 pm Revision 4b5792d2: tvrx: added enabled prop to set and get
- 08:53 pm Revision 2eb813f6: Merge branch 'subdev_enable' into next
- 08:50 pm Revision 83fd99cc: udp: add docs note about the udp transport
- 08:38 pm Revision 4a6990c5: USRP2P: Little bit of commonality in the include files. No functional change.
- 07:51 pm Revision 0edd06b7: U2P: Working ICAP bootloader. Should be ready for release.
- 07:50 pm Revision 7db726e9: U2P: Bootloader works, successfully loads production image.
- Split I2C into async and sync halves to keep the size of the bootloader small.
- 06:20 pm Revision e8e9258a: udp: worked blocking send back into udp transport, enable async with #define
- tweaked some code in bounded buffer
- 01:12 am Revision 4ed75835: U2P: Whoops.
- 01:09 am Revision c205cd32: U2P: Bootloader/ICAP updates. 2-stage bootloader works. Uses EEPROM for state ...
10/07/2010
- 11:34 pm Revision 201af62c: udp: fix msvc errors for udp transport
- 11:31 pm Revision 952db770: udp: implementation for blocking recv w/ timeout, switch async implementation ...
- 10:48 pm Revision d8563de8: U2P: remember your semicolons.
- 10:44 pm Revision 1ec89790: U2P: modified ICAP. turns out ICAP needs clock disabled while CE is not assert...
- Also committed latest bootloader, might not be final version.
- 07:37 pm Revision 4c3b5212: tvrx: converted floats to doubles to avoid msvc warnings
- 06:22 pm Revision d6e6d8bf: uhd: tweaked docs/notes on transports
- 06:10 pm Revision 26ada691: revert unneeded changes and incorrect comments
- 06:06 pm Revision 5514e67c: usrp1: ensure that the current buffer was committed before getting a new one
- 05:55 pm Revision dfbc0653: separate the bootloader image into another file
- 05:43 pm Revision 0059e62e: usrp2: moved samples per packet calculation into io_impl
- 05:27 pm Revision be6a6b29: usrp-e: use frame size to calculate the max samples per packet
- 05:11 pm Revision 86b021e4: Merge branch 'next' into usrp_e_mmap_b2
- 01:41 am Revision b40ace72: usrp1: use the transport frame sizes to calculate the max spp
- The max send spp is the frame size minus the alignment padding.
This allows us to copy a remainder into a new buffer ... - 01:15 am Revision 8d1214d5: reconnect GPIOs, remove debug pins, meets timing now
10/06/2010
- 11:26 pm Revision d5a09604: usrp-e: implemented the USER_PROCESS flag and CTM poll technique
- 11:17 pm Revision 1715dd3c: Merge branch 'ise12' into efifo_merge_dcm
- * ise12:
fix timing problem on DAC output bus
clean up DAC inversion and swapping to match schematics
Clean up ... - 11:01 pm Revision 12901b05: Add flag that indicates userspace has started processing a frame.
- 05:34 pm Revision 7c127b6c: udp: fixed boost format syntax for warning message
- 12:37 am Revision 4c852205: U2P: newest bootloader with support for 32Mbit flash
10/05/2010
- 11:54 pm Revision b6dae16e: USRP2P: internal reference selected by default.
- 10:59 pm Revision 34bef071: Merge branch 'master' into next
- Conflicts:
host/lib/transport/libusb1_base.cpp - 10:47 pm Revision 0fc64104: usb: moved event handler thread into the zero copy interface
- 07:50 pm Revision d2494b03: uhd: transport docs for UDP and USB (moved from usrp docs)
- 06:53 pm Revision 92fdf6ab: U2P: 32/64Mbit FLASH support, internal reference support for U2P r2
- 06:14 pm Revision e4d088fa: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- Conflicts:
host/lib/ic_reg_maps/CMakeLists.txt
host/lib/usrp/usrp2/io_impl.cpp - 05:30 pm Revision 0cd5375b: uhd: replaced frame params for the zero copy interfaces with a device address
- the device address gives a key, value pair of infinite optional capabilities
added a cast option to the device addre...
10/04/2010
- 11:34 pm Revision 50ff7e4d: usb: added dummy usb implementation for building without usb (throw, not segfa...
- 10:41 pm Revision c2dc0fe9: timeout: proper way to check for timeout in full buff mode
- 10:17 pm Revision f642942d: usrp-e: check if flags are ready after poll
- 10:04 pm Revision e54aa5ba: Merge branch 'timeout' into usrp_e_mmap
- 09:54 pm Revision 5bd863ef: uhd: bounded buffer pop sets back element to empty to decrement references
- 06:30 pm Revision 21918345: uhd: added include for enable_shared_from_this when used
- 06:18 pm Revision b7d828b3: Merge branch 'usrp_e_mmap' of ettus.sourcerepo.com:ettus/uhdpriv into usrp_e_mmap
- 06:17 pm Revision b34af3c9: usrp-e: implemented mmap with new zero_copy timeout work, added much debug ver...
- 05:09 pm Revision 1da774f8: Merge branch 'timeout' into usrp_e_mmap
- 05:06 pm Revision 9cea1342: uhd: modified tx timed samples to deal with timeout
- 04:48 pm Revision 4fd922ba: usrp2: removed extra print-outs in init
- 04:28 pm Revision 57ad303e: udp: added io service work to keep service running
- 02:34 am Revision c6f17f1e: uhd: changed buffer allocations to be in a single chunk, udp: pass frame sizes...
10/03/2010
- 08:41 am Revision b57c84b3: uhd: implemented udp zero copy asio with async calls
- 06:15 am Revision 7352c950: uhd: reworked the zero copy interface
- - recv buffers have a release call
- safe make function for recv buffers (buff + release callback)
- send buffer comm...
10/02/2010
- 01:22 am Revision 00cd6018: uhd: implemented a double timeout (in seconds) for send and recv chains
- converted all size_t timeout_ms to double timeout
bounded and alignment buffer now take double timeout
added timeou...
10/01/2010
- 11:08 pm Revision bd3bd0df: UHD: added mutex to fix race condition in device enumeration.
- 10:18 pm Revision c07bc03b: fix timing problem on DAC output bus
- 07:14 pm Revision a772f453: Merge branch 'next'
- 07:11 pm Revision 3a1138bc: uhd: print system info on library load
- 06:54 pm Revision 348b5b12: usb: catch open errors and print message, device: catch exceptions at discover...
- 06:07 pm Revision 67e302ee: TVRX: fixed antenna prop enumeration
- 12:59 am Revision c0e03bb2: Ignore direction for GPIO 114 since it is always an input.
- 12:56 am Revision 46d2fc42: usrp-e: untested attempt at zero copy iface for mmap
09/30/2010
- 11:23 pm Revision b079d9d1: Made usb_device_handle UHD_API.
- 10:54 pm Revision 1c3dfe21: Modified phase shift of DCM1 to -64 which is intended to give more timing marg...
- Tested to be at least as stable as a phase shift of 12 and beter looking timing on the logic analyzer.
Signals driven... - 10:12 pm Revision cc97c6ee: usrp-e: update to build with the master
- 10:03 pm Revision ccb7adcb: Merge branch 'master' into usrp_e_next
- 09:59 pm Revision 790a5ac6: uhd: updated AUTHORS and README for tvrx and usrp1
- 09:51 pm Revision 2e7991fb: Merge branch 'tvrx_uhd'
- 09:36 pm Revision 2c8a7c7d: uhd: implemented recv timeout for zero copy interface
- 07:28 pm Revision 6dd50273: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- Conflicts:
host/lib/usrp/usrp2/io_impl.cpp - 06:58 pm Revision 487ef983: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into tvrx_uhd
- 06:57 pm Revision 046d8a9a: TVRX: Fixed to properly calculate alias frequencies.
- 06:32 pm Revision 7f8d7b0e: Ignore direction for GPIO 114 since it is always an input.
- 06:32 pm Revision e4fffed0: usb: set rt thread priority for the libusb event loop
- 06:25 pm Revision dd9f9c34: Ignore direction for GPIO 114 since it is always an input.
- 06:05 pm Revision a4f8ad59: usrp: added subdev enabled property
- the dboard manager will disable all subdevs at startup and shutdown
setting the subdev spec will enable only the sub... - 05:07 pm Revision 04c74a3c: usrp1: replace byteswap with htonx (it was wrong to just swap)
- also removed unused poke and peek 16 bit calls
- 01:27 am Revision 56751efb: TVRX: works for USRP and USRP2.
- 12:51 am Revision 9c58df56: Merge branch 'get_codec_rate' of ettus.sourcerepo.com:ettus/uhdpriv into tvrx_uhd
- 12:43 am Revision 83596f1f: usrp: added get codec rate to dboard iface
09/29/2010
- 11:32 pm Revision b8e62bb9: usb: added libusb docs to build guide, usrp1: moved transfer param docs
- 10:41 pm Revision 543a6364: usrp: transfer resize options and documentation
- 04:51 pm Revision 30207847: usrp1: fixed compile time warning, tweaked fw load message
- 04:44 pm Revision 83039bdc: Merge branch 'libusb'
- 01:09 am Revision 6fe533e1: TVRX: Mixed up DAC channels. Gain is much more linear now.
- 01:04 am Revision 560cbf9a: TVRX: Fixed spectrum inversion (derp derp derp). Removed debug printing.
- 12:46 am Revision 450abc5b: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into tvrx_uhd
- 12:45 am Revision 7cb95203: TVRX: First version that works. The gain linearity is still borked.
- I'll probably give up on the complicated linearizing stuff and just use the values from the old driver. The tuner's g...
09/28/2010
- 11:53 pm Revision e4c6f42f: usb: submit should return ssize_t, usrp1: set hash before reset after fw load
- 10:31 pm Revision b70d4430: wbx: fix for id swap typo
- 08:52 pm Revision 15eacbd9: TVRX: Don't have mboard impl modified for ADC buffer disable. The rest of TVRX...
- 06:11 pm Revision 071c4d42: Merge branch 'master' into libusb
- 06:08 pm Revision f5bdb7cc: usrp1: move the get handles call into the for loop scope to facilitate decontr...
- 05:24 pm Revision 137aa0ab: usrp1: modify fpga file load to use read (readsome seems to not work here in w...
- 05:21 pm Revision 852f5c5f: dboard: better warnings for invalid IDs and invalid ID combinations
- 02:19 am Revision a6f60ab4: TVRX: not done yet but getting there. gain linearization framework in place.
09/27/2010
- 11:15 pm Revision cd83b166: usrp2: application notes for the LEDs
- 11:04 pm Revision fd159654: usrp1: filter the discovery routine on the serial
- 06:35 pm Revision 2f62c39b: uhd: fix warning by adding brackets for while(cond){};
- 07:32 am Revision 69440469: usb: use the proper libusb include (in path set by pkgconfig)
- 05:45 am Revision 1180615f: usb: added some documentation to wrapper base
- 04:07 am Revision 017e7202: usrp1: add print out messages when loading images
- 03:54 am Revision 86213f8d: usb: disable thread interruption on wait calls
- 03:23 am Revision 08169256: usb: zero copy work, multiple endpoints with single context, async io
- Heavy work on the zero copy interface and endpoint wrappers to properly use the async io.
The global libusb session s... - 01:22 am Revision 20c364cb: Really enable usrp_e support. Previous commit commented out the ansi flag
- so C++ comments in C compile.
- 01:22 am Revision 507283b3: Remove BIT macro
- 01:21 am Revision 018813d4: Add define so uusrp_e support is enabled.
09/26/2010
- 04:07 am Revision dc8bcfde: usb: work on libusb code to use a single context across all calls
- libusb allocation stuff had been moved inside of smart pointer classes to handle automatic cleanup
the public device...
09/25/2010
- 03:51 pm Revision c75286df: Add more NEON for type conversion.
- 01:14 am Revision 1dffd5bb: usb: tweaks to usb code to cleanup properly and/or in error conditions
09/24/2010
- 10:56 pm Revision 082715d0: usrp-e: updated dsp for multiple shift properties
- 10:53 pm Revision 192663bc: Merge branch 'master' into usrp_e
- Conflicts:
host/CMakeLists.txt - 09:37 pm Revision 1f774947: allow for CS to rise before, at the same time, or after OE
- 06:07 pm Revision f2f4840f: usb: moved msvc stdint file and changed cmake conditional for msvc
- 01:56 am Revision 5d6d25b4: Merge branch 'libusb_win'
- 01:56 am Revision 5fc96b27: Merge branch 'xusrp'
- 01:47 am Revision 188162a4: usrp: modified pps input tester to use double with real value for seconds
- 01:46 am Revision 42576f1e: usrp1: removed msvc warnings for usrp1 impl code
- 01:32 am Revision af1882ab: usrp1: modified control to use the c++ ifstream over fopen
- 01:12 am Revision 8d55b861: Merge branch 'xusrp' into libusb_win
- 01:07 am Revision f97c4338: usrp1: fixes to remove warnings and errors for usrp1 + libusb windows
- 12:22 am Revision 1826421c: libusb: various minor code tweaks
- 12:15 am Revision 69992b41: better debug pins
09/23/2010
- 10:42 pm Revision ea82d5fe: libusb: various minor code tweaks
- 07:58 pm Revision 24bcc7d7: basic: added the 4th BA subdevice to basic and lf dboard code
- 07:47 pm Revision fbcd6772: usrp1: sanity check, only 1 channel per tx slot
- 07:37 pm Revision c36b8a83: usrp1: multi-channel tx working, modified vrt handler to interleave
- 06:40 pm Revision 27eb894c: watch the ethernet chip select on our debug bus
- 02:14 am Revision 7ee585f2: usrp1: multi-channel rx working, modified vrt handler to deinterleave
- 12:36 am Revision 00057889: usrp1: reworked the io_impl for usrp1 to use the vrt packet handler
- used dummy packers and unpackets that have a header size of zero
created wrapper around the data transport to handle...
09/22/2010
- 06:36 pm Revision 27cb282a: uhd: honor the LIB_SUFFIX option, added docs for LIB_SUFFIX and tweaked other ...
- disabled -pedantic for now as well
- 12:00 am Revision d78fd935: fix timing issue on DAC outputs with rev 2. This puts the whole system on a 9...
09/21/2010
- 08:06 pm Revision 77cdb4a9: Use a dummy write to start DMA transfers when sending data to the FPGA.
- Poll will also start data transfers.
- 07:59 pm Revision 943bfa27: Use the ring buffer sizes read from the kernel.
- 07:47 pm Revision 38088979: Convert write to use the mmap interface.
- 06:07 pm Revision d6c4fbb2: Read the ring buffer size from the kernel and use that to set up the
- structures that read and write the ring buffer.
- 05:41 pm Revision ba658f4d: added db_tvrx, regmap gen_dtt75403_regs.py
- 03:06 pm Revision d4a80a2b: Fix ring buffer size calculation.
- 01:22 am Revision 887aab36: usrp2: make usrp2 dsp multi-channel compatible
- 01:17 am Revision d68922ed: usrp1: implemented multi-channel dsp control of shift freq
- usrp: simple usrp calls into single usrp and prints deprecation warning
usrp: tune helper now supports multi-channel...
09/20/2010
- 11:59 pm Revision 1625bcb4: uhd: added single usrp interface, added usrp1 properties to prop names
- 08:31 pm Revision 7888b861: Fix really dumb mistake in rad ring buffer code. Add/comment debug
- lines.
09/17/2010
09/16/2010
09/15/2010
- 09:58 pm Revision ed245848: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p
- Conflicts:
host/lib/usrp/usrp2/CMakeLists.txt
host/lib/usrp/usrp2/mboard_impl.cpp
host/lib/usrp/usrp2/usrp2_regs.hpp
09/14/2010
- 06:46 pm Revision 7ffe28cc: Enabled phase offset adjustment on DCM_INST1 which drives the external Fast SR...
- Set phase shift to -12 after experimentation using logic analyzer to see results.
This value gives near optimum 1.5nS...
Also available in: Atom